acectrl --spectrum-preset-focus valuecommand. If you don't, the default value is 11600, and large deviations from this are highly unlikely, thus it might be used as well (also note that end-switches are installed).
/usr/local/bin/qsictrl: connection to camera failed, aborting.error message. Also, the camera probably beeps loudly, and the led on its back glows red. Solution: manual reset (unplug the camera and plug it in again). Be careful: the camera can easily be moved from the focal point by accident.
sequence: imaging device is busy, waiting...or
module: unable to initialize module 'mod_fli_camera.so':via initializer '__init': unable to access and/or initialize FLI CCD camera device.message. Solution: notify the support astronomer (or restart 172.31.171.98)